The Andyson Platinum R 1200W PSU Review
by E. Fylladitakis on April 24, 2015 8:00 AM EST- Posted in
- Cases/Cooling/PSUs
- 1200W
- 80Plus Platinum
- Andyson
The Andyson Platinum R 1200W PSU - External Appearance
Visually, the Andyson Platinum R 1200W is not exactly a work of art yet it does have an element of subtleness and can be fairly appealing, depending on your requirements. The long chassis is sprayed with a grainy matte black paint, a circular finger guard covers the cooling fan and a subtle sticker with the company logo has been placed on its side.
A decorative sticker covers the right side of the chassis, facing towards the windowed side panel if the PSU is installed with the fan facing upwards. If the PSU is installed with the fan facing downwards, the sticker will be facing the right panel of the case and it will be upside down.
The left side of the PSU is almost entirely plain, with the exception of a series logo printed at the lower right corner of the chassis. This logo will be upside down if the PSU is installed with the fan facing downwards.
The rear of the PSU is a little interesting, with the AC cable receptacle and the on/off switch placed on a different, white metallic frame that covers nearly half of the surface. The other half is perforated for the cooling air to escape to the exterior of the case.
A large number of connectors for the modular cables take up most of the space at the front of the unit. The rest of the surface is covered by a sticker, serving as a legend for the connectors and as a warning label. Funnily, it advises against the removal of the PSU cover and warns that the warranty will be void if the seal is broken, yet this cover cannot be removed and there is no warranty sticker to be found anywhere.
The sticker with the electrical specification of the PSU can be found at the top of the chassis.
46 Comments
View All Comments
TurboTastic - Friday, April 24, 2015 - link
80 Plus isn't marketing if you're paying the electric bill!DanNeely - Friday, April 24, 2015 - link
At the 10-15 cent per kWh electric rates common in most of the US the price premium for a platinum PSU only pays off over a gold one if you're running 24/7 at full load; and even that takes several years. If you only game a few hours/day and leave your PC at idle/off the rest of the time you might as well go with a sanely sized cheaper one. If you're unfortunate enough to be paying several times that then even casual gaming will push the payback period to a reasonablish timeframe.Laststop311 - Saturday, April 25, 2015 - link
Unless you want your PSU operating in its fanless mode as the high end semi fanless psu's dont kick then fan on till around 30% load. 30% of 1500 is 450 watts of fanless operation while a 500 watt supply only has 150 watts of fanless operation. Some people care about noise.CrazyElf - Saturday, April 25, 2015 - link
80 PLUS actually means very little for real world efficiency. They usually send their best units to ECOS. It's real world efficiency that counts under load and often the ones with the stickers are overrated.As far as the costs - it's only a few dollars per year because we're talking single digits. The purchase price vastly overshadows that. I'd go with voltage, ripple, and reliability any day over advertised efficiency.
meacupla - Sunday, April 26, 2015 - link
I haven't really seen any 80+ Bronze or higher PSU suffer from voltage, ripple or reliability issues.Usually the makers skimp on the fan first.
I prefer 80+ Gold/Platinum, because I can count on makers to stuff the very best they have into those units, which means happy ears and reliability.
TurboTastic - Friday, April 24, 2015 - link
Also, the efficiency is directly correlated to the heat produced by the PSU, and that is inversely related to both the quietness and the speed of your computer, which are qualities everyone cares about.der - Friday, April 24, 2015 - link
A Wise man once said: "A Great gaming computer comes with a great Power Supply/PSU".etamin - Friday, April 24, 2015 - link
I only click on these PSU reviews to read the comments about irrelevantly powerful PSUs. Maybe AT will listen eventually. But the sponsors are to blame as well...I would think a review on lower wattage units would have greater impact on sales.Mickatroid - Saturday, April 25, 2015 - link
LOL, I am here for the comments too. The claws are out, loving it.Laststop311 - Saturday, April 25, 2015 - link
I've been waiting for a nice 600-800 watt 80+ titanium unit to come out.There are some good reasons to get larger power supplies now that they have semi fanless mode. Now most psu's have no fan mode that works up to about 30% of the PSU's output. So if you have a 1000 watt unit you can draw up to 300 watts before the fans need to kick on. Almost all single GPU systems nowadays stay under 300 watts at most normal loads. Sure you could just get a 500 watt PSU but the fans come on at 150 watts or more so you end up with more fan noise. Surely an i7-7960x 8 core skylake overclocked to the maximum efficient overclock of 4.2ghz (if the oc power response curve is the same as haswell after 4.2ghz on the 8 core power use rises sharply 14nm could possibly make it 4.3 or 4.4ghz before power use risies sharply) and a nice EVGA classified GTX 980ti will only draw 250-280 watts on most normal workloads and gaming and someone that is an absolute freak about having the quietest powerful pc possible will want a 80+ plat or even titanium 1kw unit to make sure their psu rarely spins up a fan.
I will be sparing no expense on my skylake-e build and will be picking every component with noise as a top priority as my pc is in my bedroom and I am looking for a 1kw or higher 80+ titanium unit. Currently I think 1500 watt is the lowest titanium available which gives you 450 watts of fanless operation. I will be going all air cooled as I prefer the dead silence of noctua fans over the hum of water pumps. I go the route of maximizing case fans in every available spot usually like 12 fans which allows you to use the ULNA adapters to keep the max PWM speed below audible levels and the sheer huge quantity of them makes up for the loss of airflow from reduced rpm's. It's less efficient money wise but with all the right parts picked the only time the pc can be remotely heard is when gaming and the graphics card kick on tho even this noise can be drastically reduced with a triple slot artic accelro extreme IV with the front and back heatspreaders and 3 front fans and 2 rear fans and the best performing liquid metal ultra tim applied to it.
Since it will have been 6.5 years since I built a PC I am able to spend way more money than usual when I'm building a PC as I got a nice little egg saved. And I think a lot of people will be in similar situations because of how slow CPU performance upgrades have been. And for people like us going to these extreme lengths for top performing quiet PC's we need the huge unites so we can stay in fanless mode.