Crucial Portable SSD X6 and X8 2TB Review: QLC for Storage On-the-Goby Ganesh T S on October 21, 2020 8:00 AM EST
Bus-powered portable flash-based storage solutions are one of the growing segments in the consumer-focused direct-attached storage market. The emergence of 3D NAND with TLC and QLC has brought down the cost of such drives. NAND manufacturers like Western Digital, Samsung, and Crucial/Micron who also market portable SSDs have an inherent advantage in terms of vertical integration. Last year, Crucial/Micron had announced its entry into the segment with the QLC-based Crucial Portable SSD X8, which was reviewed in January. A few months back, Crucial updated the lineup with a 2TB model while adding a lower-performance X6 member to the portfolio. This review sets out to determine how these high-capacity portable SSDs fare against the competitors in this market segment.
External bus-powered storage devices have grown both in storage capacity as well as speeds over the last decade. Thanks to rapid advancements in flash technology (including the advent of 3D NAND and NVMe) as well as faster host interfaces (such as Thunderbolt 3 and USB 3.x), we now have palm-sized flash-based storage devices capable of delivering 2GBps+ speeds. While those speeds can be achieved with Thunderbolt 3 and USB 3.2 Gen 2x2, mass-market devices have to rely on traditional USB. Entry-level USB drives utilize a flash controller with a direct USB interface, while the mid-range and high-end ones use flash packages behind either a SATA or NVMe SSD controller in conjunction with a SATA/NVMe-USB bridge. In today's review, we take a look at the Crucial Portable SSD X6, a SATA SSD behind a USB 3.2 Gen 2 bridge chip, and the Crucial Portable SSD X8, a NVMe SSD behind a USB 3.2 Gen 2 bridge chip.
From a performance viewpoint, the X6 and X8 fall under different categories that are referred to here on as SATA-class and NVMe-class. Under the SATA-class devices, the Crucial Portable SSD X6 is pitted against the following external SSDs that were reviewed earlier:
- ADATA SC680 960GB
- HP P600 500GB
The Crucial Portable SSD X8 goes head-to-head against the following drives:
- Crucial Portable SSD X8 1TB
- OWC Envoy Pro EX USB-C 2TB
- SanDisk Extreme PRO Portable SSD v2 2TB [JHL6540]
- SanDisk Extreme Portable SSD v2 1TB
- WD My Passport SSD (2020) 1TB
A quick overview of the internal capabilities of the SATA-class drives is given by CrystalDiskInfo.
|SATA-Class External Drives Information|
The X6 supports both UASP and TRIM - the two main things to look out for when dealing with SATA SSDs behind a USB bridge.
On the NVMe-class drives front, CrystalDiskInfo provides the following information.
|NVMe-Class External Drives Information|
Despite TRIM not being explicitly mentioned in the CrystalDiskInfo report, we were able to activate it on the X8. Otherwise, the reported S.M.A.R.T attributes are similar to the ones obtained for the other external SSDs in the same class.
Testbed Setup and Testing Methodology
Evaluation of DAS units on Windows is done with a Hades Canyon NUC configured as outlined below. We use one of the rear USB Type-C ports enabled by the Alpine Ridge controller for both Thunderbolt 3 and USB devices.
|AnandTech DAS Testbed Configuration|
|CPU||Intel Core i7-8809G
Kaby Lake, 4C/8T, 3.1GHz (up to 4.2GHz), 14nm+, 8MB L2
|Memory||Crucial Technology Ballistix DDR4-2400 SODIMM
2 x 16GB @ 16-16-16-39
|OS Drive||Intel Optane SSD 800p SSDPEK1W120GA
(118 GB; M.2 Type 2280 PCIe 3.0 x2 NVMe; Optane)
|SATA Devices||Intel SSD 545s SSDSCKKW512G8
(512 GB; M.2 Type 2280 SATA III; Intel 64L 3D TLC)
|Chassis||Hades Canyon NUC|
|PSU||Lite-On 230W External Power Brick|
|OS||Windows 10 Enterprise x64 (v1909)|
|Thanks to Intel for the build components|
Our evaluation methodology for direct-attached storage devices adopts a judicious mix of synthetic and real-world workloads. While most DAS units targeting a particular market segment advertise similar performance numbers and also meet them for common workloads, the real differentiation is brought out on the technical side by the performance consistency metric and the effectiveness of the thermal solution. Industrial design and value-added features may also be important for certain users. The remaining sections in this review tackle all of these aspects after analyzing the features of the drives in detail.
Post Your CommentPlease log in or sign up to comment.
View All Comments
govtjobsiti - Saturday, November 13, 2021 - linkStill, you must have encountered one veritably troubling but important question, i, If you're a pupil who's either planning to pursue or is formerly pursuing ITIcourses.e.,‘What are the career prospects after ITI?’ Moment, chops of a professional matter as much as their academic degree. To eclipse that, colorful government programmes similar as Skill India are also pushing to empower the youth of the country with skill sets which make them more exploitable and more productive in their work terrain. https://www.itijobs.co/ Thus, scholars who have experienced training at the Industrial Training Institutes (ITI) across India, have excellent career openings ahead of them.
govtjobsiti - Monday, November 29, 2021 - linkGet all the latest Government & Private ITI vacancy 2021 and most important ITI Jobs Beta notification in Hindi on our website. students can also Get all https://iticampus.co/, Exam Alerts, Sarkari Naukri Notification here. Students can also Download Admit cards, latest ITI Jobs Beta results, ITI Jobs Beta , sarkari naukri, sarkari rojgar, rojgar result, Admit Card, Latest Jobs, Results, ITI Govt Jobs, in various sectors such as Railway, Navy, https://www.itijobs.co/government-jobs/hal-recruit... UPPSC, Army, Police, https://www.itijobs.co/government-jobs/ecil-recrui... and more free government & Private jobs alert only at one place.