Intel on Thursday announced that it would delay mass production of its 10 nm processors from 2018 to 2019 due to yield issues. The company has claimed to be shipping some of its 10 nm chips in small volumes right now, but due to cost reasons the firm does not intend to initiate their high-volume manufacturing (HVM) at this time. Intel executives also stated that they are confident of their product roadmap and intend to launch Whiskey Lake and Cascade Lake products later this year.

Multipatterning Issues

Brian Krzanich, CEO of Intel, stated during a conference call with financial analysts:

“We are shipping [10-nm chips] in low volume and yields are improving, but the rate of improvement is slower than we anticipated. As a result, volume production is moving from the second half of 2018 into 2019. We understand the yield issues and have defined improvements for them, but they will take time to implement and qualify.”

Intel blames a very high transistor density and consequent heavy use of multipatterning for low yields. Brian Krzanich has said that in certain cases the company needs to use quad (4x), penta (5x), or hexa (6x) patterning for select features as they need to expose the wafer up to six times to “draw” one feature. This not only lengthens Intel’s manufacturing cycle (which by definition rises costs) and the number of masks it uses, but also has an effect on yields.

Intel’s 10 nm fabrication technology relies solely on deep ultraviolet (DUV) lithography with lasers operating on a 193 nm wavelength at this time. The company’s 7 nm manufacturing process will use extreme ultraviolet (EUV) lithography with laser wavelength of 13.5 nm for select layers, eliminating use of extreme multipatterning for certain metal layers. As it appears, right now Intel executives do not consider EUV technology ready for prime time in 2019, so the company’s engineers have to polish off the last DUV-only process (again) rather than jump straight to 7 nm.

10 nm Ramp in 2019

Intel does not elaborate whether it intends to ship (in volume) its 10 nm CPUs in the first half or the second half of 2019, but only says that the company’s engineers know the source of the yield problems and are working hard to fix them. As a result, it is pretty safe to assume that the actual ramp of Intel’s 10 nm production will begin towards the second half of next year.

“We are going to start that ramp as soon as we think the yields are in line, so I said 2019,” Mr. Krzanich noted. “We did not say first or second half, but we will do it as quickly as we can, based on the yield.”

In a bid to stay competitive before its 10-nm CPUs ship in the H2 2019 – H1 2020 (production ramp takes time, bigger processors will launch later than smaller parts), Intel plans to release another generation of products made using its 14 nm process tech. This generation of chips includes Whiskey Lake products for client PCs and Cascade Lake for the datacenter, and both are scheduled for release later this year.

Questions Remain: 10 nm Slip from 2016

Intel’s 10 nm manufacturing process has a long history of delays and without any doubts this transition has been the hardest in the company’s history. Let's do a quick recap.

First Production
1999 180 nm
2001 130 nm
2003 90 nm
2005 65 nm
2007 45 nm
2009 32 nm
2011 22 nm
2014 14 nm
2016 10 nm
2017 10 nm
2018 10 nm?
2019 10 nm!

Intel originally planned to commence shipments of its first processors made using their 10 nm fabrication technology in the second half of 2016. The first rumors about Intel’s problems with the tech started to spread in early 2015 as the company delayed the installation of equipment needed for its 10 nm manufacturing process. Then, in July 2015, the chip giant confirmed intentions to postpone 10 nm HVM from H2 2016 to H2 2017 due to difficulties incurred by multipatterning. Instead, the company promised to release its Kaby Lake products with enhancements and made using a refined 14 nm process (known as 14+ later).

Over the course of 2016 and 2017 we learned that Intel was prepping Cannon Lake (mobile, entry-level desktops), Ice Lake (higher-end client PCs, servers), and Tiger Lake chips on their 10 nm node. We also heard about various problems that Intel faced with its 10 nm technology, but the company refuses to comment on them. The chipmaker did demonstrate a system running a mobile Cannon Lake SoC at CES 2017, with a promise to release this processors late that year. Somewhere along the line, both Ice Lake and Tiger Lake slipped to 2018, which was partly confirmed by the launch of the Coffee Lake CPU made using a revamped 14 nm (14++) in late 2017.

Intel officially introduced the 10 nm fabrication process at IEDM 2017 and said it was on track to start shipments of CNL CPUs in early 2018. In January this year Intel confirmed that they had started to ship Cannon Lake processors in small volumes, but never elaborated. We have since learned that these were CNL-U parts in uninspiring 2+2 and CNL 2+0 configurations, however so far Intel has refused to state who the customer is or where anyone can buy them, despite repeated requests for this information.

Being a very large company, Intel has a multifaceted strategy that spans across product lines and generations. Right now, Intel is battling with yield issues that plague its Cannon Lake product family and the first-gen 10 nm manufacturing process. There are other 10 nm products in the pipeline that are to be made using a refined fabrication technology (such as 10+, 10++). It is pretty obvious that Intel will learn how to improve its 10 nm yields with the CNL lineup, but what remains to be seen is how significantly the delays of this product family affect launch schedules of its successors. Despite Intel's statements, there is outside discussion that Intel could decide to switch right to 7 nm, bypassing 10 nm altogether.

Related Reading

Sources: Intel, SeekingAlpha

Comments Locked


View All Comments

  • HStewart - Sunday, April 29, 2018 - link

    Actually issue is Intel Wanna Bee's - internally to Intel - everything is going good - actually hiring new people and coming up with new technology. Of course they realize some technology like wearables were false investments and they decided to get out of completely.

    You can tell these false claims - by simply what they call Intel "chipzilla" which is sure a dead giveaway of false mis-information.
  • Wilco1 - Sunday, April 29, 2018 - link

    Intel has been closing various departments recently, large markets were abandonned, many products were cancelled. And the now 4 year delay of 10nm must hurt.

    And you're seriously claiming all is going well as planned??? What a genious plan that is!

    So tell me, how do we know you aren't the one who is spreading all the misinformation?
  • Arbie - Sunday, April 29, 2018 - link

    "they call Intel "chipzilla" which is sure a dead giveaway of false mis-information"

    Chipzilla is used everywhere. It's not pejorative.

    "False mis-information" - is that true information?
  • zodiacfml - Monday, April 30, 2018 - link

    Crazy. I thought this will be the last generation of the 14nm products.
    They better lose the time and burn cash with EUV equipment or use it for 10nm products as an initial phase of EUV manufacturing.
  • peevee - Monday, April 30, 2018 - link

    Was somebody at least fired for the massive failure?
  • jardows2 - Monday, April 30, 2018 - link

    depends on the gender, ethnic, and sexual identity of the person responsible.
  • peevee - Monday, April 30, 2018 - link

    "This not only lengthens Intel’s manufacturing cycle (which by definition rises costs) and the number of masks it uses, but also has an effect on yields."

    And the only point of decreasing size of the features is to decrease cost per transistor. Which is increasing now. End of Si, finally?
    Given that other companies' 7nm is ~ Intel's 10nm, can we expect the same fiasco?
  • FunBunny2 - Monday, April 30, 2018 - link

    "End of Si, finally?"

    only if there's an alternative element:
    1 - equally abundant
    2 - equally cheap to extract
    3 - equally efficient to use

    the real problem is the decreasing number of atoms/feature. doesn't matter which element is used for construction. once you've crossed into Heisenberg territory, there be dragons there.
  • peevee - Monday, April 30, 2018 - link

    "1 - equally abundant
    2 - equally cheap to extract"

    Price of sand is non-issue in all chips, even in memory and flash, let alone CPUs and GPUs.

    Carbon is cheap and abundant, but even expensive Ge might be economical if it saves size (by raising frequencies) or manufacturing costs.

    Also, by "the end of Si" I meant the end of manufacturing improvements on Si. And it is not a physical barrier, it is an economic barrier. If you don't decrease cost per MIPS, decreasing feature size make no sense for mass market. And 10nm (Intel) bangs against that barrier for 5 years now with no win in sight, just like non-EUV "7nm" from other fabs will be with no doubt.
  • FunBunny2 - Monday, April 30, 2018 - link

    "but even expensive Ge might be economical if it saves size (by raising frequencies) or manufacturing costs."

    without proof that Ge can be used to produce features smaller, and still deterministic, than can be done with Si, there's no reason to believe the end product would be cheaper.

    "Germanium ranks near fiftieth in relative abundance of the elements in the Earth's crust. "
    from the wiki.
    "Over 90% of the Earth's crust is composed of silicate minerals, making silicon the second most abundant element in the Earth's crust (about 28% by mass) after oxygen."
    from the wiki.

Log in

Don't have an account? Sign up now