Premier ONE, Premier Pro, & XPG SDXC Cards Performance

The first performance section deals with the cards in the SD form factor. The Premier ONE with its UHS-II rating is the flagship, while the Premier Pro and the XPG (UHS-I) carry similar performance numbers.

Sequential Accesses

ADATA claims speeds of up to 290 MBps for the Premier ONE and 95 MBps for the other two, but real-world speeds are bound to be lower. In fact, writes can sometimes be much slower. For most applications, that really doesn't matter as long as the card is capable of sustaining the maximum possible rate at which the camera it is used in dumps data. We use fio workloads to emulate typical camera recording conditions. We run the workload on a fresh card, and also after simulating extended usage. Instantaneous bandwidth numbers are graphed. This gives an idea of performance consistency (whether there is appreciable degradation in performance as the amount of pre-existing data increases and / or the card is subject to wear and tear in terms of amount and type of NAND writes). Further justification and details of the testing parameters are available here.

The Premier ONE is outright impressive. It exhibits remarkable performance consistency compared to the other SDXC cards (including the Lexar one that we reviewed earlier this year). Even under sustained loading conditions, it is able to maintain more than 130 MBps of writes. Unfortunately, the same praise can't be given to the XPG and Premier Pro. While the write performance consistency can be appreciated for the two cards in the fresh case, the same benchmark after subject to simulation of extended usage reveals their shortcomings. We see writes dropping down to 12 - 15 MBps occassionally.

AnandTech DAS Suite - Performance Consistency

The AnandTech DAS Suite involves transferring large amounts of photos and videos to and from the storage device using robocopy. This is followed by selected workloads from PCMark 8's storage benchmark in order to evaluate scenarios such as importing media files directly into multimedia editing programs such as Adobe Photoshop. Details of these tests from the perspective of memory cards are available here.

In this subsection, we deal with performance consistency while processing the robocopy segment. The graph below shows the read and write transfer rates to the memory card while the robocopy processes took place in the background. The data for writing to the card resides in a RAM drive in the testbed. The first three sets of writes and reads correspond to the photos suite. A small gap (for the transfer of the videos suite from the primary drive to the RAM drive) is followed by three sets for the next data set. Another small RAM-drive transfer gap is followed by three sets for the Blu-ray folder. The corresponding graphs for similar cards that we have evaluated before is available via the drop-down selection.

The testing doesn't reveal any throttling or significant effects due to fill up of an internal SLC cache or any other such mechanism. The performance numbers themselves tally with the claims of the manufacturers.

AnandTech DAS Suite - Bandwidth

The average transfer rates for each workload from the previous section is graphed below. Readers can get a quantitative number to compare the ADATA Premier ONE SDXC UHS II 128GB SD card against the ones that we have evaluated.

robocopy - Photos Read

robocopy - Photos Write

robocopy - Videos Read

robocopy - Videos Write

robocopy - Blu-ray Folder Read

robocopy - Blu-ray Folder Write

We also look at the PCMark 8 storage bench numbers in the graphs below. Note that the bandwidth number reported in the results don't involve idle time compression. Results might appear low, but that is part of the workload characteristic. Note that the same testbed is being used for all memory cards. Therefore, comparing the numbers for each trace should be possible across different cards.

robocopy - Photoshop Light Read

robocopy - Photoshop Light Write

robocopy - Photoshop Heavy Read

robocopy - Photoshop Heavy Write

robocopy - After Effects Read

robocopy - After Effects Write

robocopy - Illustrator Read

robocopy - Illustrator Write

Performance Restoration

The traditional memory card use-case is to delete the files on it after the import process is completed. Some prefer to format the card either using the PC, or, through the options available in the camera menu. The first option is not a great one, given that flash-based storage devices run into bandwidth issues if garbage collection (processes such as TRIM) is not run regularly. Different memory cards have different ways to bring them to a fresh state.Based on our experience, SD cards have to be formatted using the SD Formatter tool from the SD Association (after all the partitions are removed using the 'clean' command in diskpart).

In order to test out the effectiveness of the performance restoration process, we run the default sequential workloads in CrystalDiskMark before and after the formatting. Note that this is at the end of all our benchmark runs, and the card is in a used state at the beginning of the process. The corresponding screenshots for similar cards that we have evaluated before is available via the drop-down selection.

The XPG seems to benefit from the performance restoration process, but, the effect in the Premier ONE and the Premier Pro seems minimal. Consumers should expect the performance to go down with extended usage.

Introduction and Evaluation Setup Premier ONE & XPG microSDXC Cards Performance
POST A COMMENT

19 Comments

View All Comments

Log in

Don't have an account? Sign up now