Meet the GeForce GTX 1080 Ti Founder’s Edition

When it comes to the design of the GeForce GTX 1080 Ti Founder’s Edition, if you’ve seen a high-end NVIDIA card in the last 4 years then you know roughly what to expect. NVIDIA has found their sweet spot in card design, and while the GTX 1080 Ti does have a few wrinkles of its own, it’s not a radical departure from the likes of the GTX 1080, GTX 980 Ti, or GTX 780 Ti. GeForce GTX 1080 Ti is a traditional NVIDIA reference card, with all the competence, performance, and functionality that entails.

At a high level, the GTX 1080 Ti Founder’s Edition is a 10.5-inch long blower-type card comprised of a cast aluminum housing and held together using a combination of rivets and screws. Designed as much for aesthetics as functionality, NVIDIA’s use of well-secured metal has done a good job of tempering noise generation, and for those who like to show off their rigs, the basic design and LED-backlit logo are unmistakable.

Cracking open the card and removing the shroud exposes the card’s fan and heatsink assembly. Once again NVIDIA is lining the entire card with an aluminum baseplate, which provides heatsinking capabilities for the VRMs and other discrete components below it, along with providing additional protection for the board. Like past NVIDIA 250W cards, the GTX 1080 FE uses NVIDIA’s vapor chamber cooler in order to maximize the heat transfer between the GPU/VRMs/DRAM and the aluminum heatsink above. As far as blower-type cards go, it’s still the card to beat.


Airflow: GTX 1080 Ti vs. GTX 1080

For the GTX 1080 Ti, NVIDIA has refined this basic design just a bit in order to further increase airflow. The key change here is that NVIDIA has removed the DVI port that in past designs took up part of the second slot used for ventilation. Consequently the entire slot is now open for airflow. As we’ll see in our benchmarks the practical difference in noise is not very much, but it still means the GTX 1080 Ti is quieter than the GTX 980 Ti and GTX 780 Ti that came before it.

Otherwise in a blink-and-you’ll-miss-it kind of change, NVIDIA has also tweaked the tapering of the shroud itself to maximize the airflow. It’s difficult to pick up in pictures, but the shroud is just a bit thinner and the bottom of the shroud is just a bit higher, allowing just a bit more unobstructed airflow through the card. This subtle change is a good example of where NVIDIA is in their card design cycle: with the major performance elements of the cooler design essentially being a solved problem, NVIDIA is now toying with small changes to eke out just a bit more performance.

Popping off the cooler, we see NVIDIA’s reference PCB. This appears to be the same PCB used on the similarly configured GP102-based Titan X Pascal, and is consistent with NVIDIA’s past reuse of PCBs.

Of particular note, we can see that NVIDIA has equipped the card with a surprising number of MOSFETs, and it turns out there’s a good reason for this. For the GTX 1080 Ti, NVIDIA has opted to go with two dualFETs for each of the GPU’s 7 power phases, as opposed to the traditional 1-per-phase design used in most NVIDIA cards. While this drives up the total cost of the card a bit, the payoff is that it improves on the card’s power delivery efficiency a bit, especially at the 200W+ range the GTX 1080 Ti operates in.

This isn’t the first overall GeForce card we’ve seen with a large number of MOSFETs – NVIDIA’s board partners at times treat it as a contest in and of itself – but this is the first time we’ve seen NVIDIA use such a large number and promote it. Generally speaking additional phases and MOSFETs can improve a power delivery subsystem by spreading out the load – and in a game of inches, every bit counts –  but the additional MOSFETs are subject to diminishing returns both at idle and load.

Otherwise this is a fairly typical NVIDIA PCB. The reuse of the Titan PCB means that the board should work with water blocks and other add-ons designed for the Titan, though I suspect for best overclocking results the hardcore overclockers will continue to want to look to more specialized designs from the likes of MSI, EVGA, Asus, and others.

Flipping the card over to the back, we find NVIDIA’s now-standard segmented backplate. The presence of the backplate helps to protect the card, but one or both segments can be removed to add precious millimeters of room for airflow in tightly packed SLI designs.

Moving on, towards the top of the card we find the requisite SLI and power connectors. Like NVIDIA’s 250W cards before it, the GTX 1080 Ti features a 6 pin + 8 pin setup. NVIDIA’s 250W limit means that, on-board circuitry aside, the power delivery system isn’t anywhere close to its 300W limit. Otherwise we find a pair of SLI connectors, which like the rest of the GTX 10-series cards are designed for use with NVIDIA’s latest-generation High Bandwidth (HB) bridges.

Finally, getting back to NVIDIA’s display I/O configuration, as we mentioned earlier NVIDIA has removed the DVI port from the card in favor of giving the card unobstructed airflow for better cooling. As a result, the card features only modern ports: 3x DisplayPort 1.4 and 1x HDMI 2.0b. With that said, as a consolation item of sorts for the remaining DVI users, NVIDIA is including a DisplayPort-to-SL-DVI adapter with the Founder’s Edition card. This doesn’t perfectly replace the missing DVI port – in particular, it can’t drive 2560x1440 or 2560x1600 displays – but for lower resolution displays it will do the trick. But if it’s not already clear from this change and the number of motherboards to drop DVI over the years, DVI’s days are numbered, and we’re only going to continue to see DVI ports go away at this point.

The GeForce GTX 1080 Ti Review Second Generation GDDR5X: More Memory Bandwidth
Comments Locked

161 Comments

View All Comments

  • ryvoth - Thursday, March 9, 2017 - link

    Solid card release from NVIDIA too bad our costs in Canada suck due to the dollar.
  • mapesdhs - Saturday, March 11, 2017 - link

    Ditto the UK. Sites keep mentioning an RRP of $700, but in the UK it's the equivalent of more like $900+.
  • Meteor2 - Tuesday, March 14, 2017 - link

    Don't forget the US doesn't have VAT. Or a NHS.
  • Mr Perfect - Thursday, March 9, 2017 - link

    Wait, so Pascal is going to have a two year lifecycle as-is? There won't be a refinement cycle like Fermi to Kepler? That's a little disappointing.
  • Ryan Smith - Thursday, March 9, 2017 - link

    Fermi technically had a 2-year lifecycle. The only reason it was special is because the original silicon had issues, and NV opted to fix it.

    There are still yearly product refreshes, but GPUs are too expensive to develop (and the underlying manufacturing process too slow to advance) to do top-to-bottom new GPUs every single year.
  • supcaj - Thursday, March 9, 2017 - link

    Disappointed to STILL not see ANY VR-related benchmarks in the suite. VR rendering has unique rendering requirements, and a huge margin of gamers have moved or are planning to move to VR during the lifetime of this card.
  • r3loaded - Thursday, March 9, 2017 - link

    Hey, 'member when top-tier GPUs costed $499? I 'member!
  • eddman - Thursday, March 9, 2017 - link

    http://i.imgur.com/pGKlskP.png
  • Mr Perfect - Thursday, March 9, 2017 - link

    I'd love to see how that compares father back, adjusted for inflation. My rose tinted goggles have me remembering top-tier GPUs launching for $400 or less back in the early 2000s, but who knows how that compares to 2017 dollars.
  • eddman - Friday, March 10, 2017 - link

    http://i.imgur.com/OU6612c.png

    There are a lot of inflation calculators online. Like this: https://www.bls.gov/data/inflation_calculator.htm

    A geforce 2 ultra was $705 in 2017 dollars!

Log in

Don't have an account? Sign up now