Sometimes a surprise is nice. Other times it’s nice for things to go as planned for once.

Compared to the HD 4800 series launch, AMD’s launch of the HD 5800 series today is going to fall into the latter category. There are no last-minute announcements or pricing games, or NDAs that get rolled back unexpectedly. Today’s launch is about as normal as a new GPU launch can get.

However with the lack of last-minute surprises, it becomes harder to keep things under wraps. When details of a product launch are announced well ahead of time, inevitably someone on the inside can’t help but leak the details of what’s going on. The result is that what we have to discuss today isn’t going to come as a great surprise for some of you.

As early as a week ago the top thread on our video forums had the complete and correct specifications for the HD 5800 series. So if you’ve been peaking at what’s coming down the pipe (naughty naughty) then much of this is going to be a confirmation of what you already know.

Today’s Launch

3 months ago AMD announced the Evergreen family of GPUs, AMD’s new line of DirectX11 based GPUs. 2 weeks ago we got our first briefing on the members of the Evergreen family, and AMD publically announced their Eyefinity technology running on the then-unnamed Radeon HD 5870. Today finally marks the start of the Evergreen launch, with cards based on the first chip, codename Cypress, being released. Out of Cypress comes two cards: The Radeon HD 5870, and the Radeon HD 5850.

  ATI Radeon HD 5870 ATI Radeon HD 5850 ATI Radeon HD 4890 ATI Radeon HD 4870
Stream Processors 1600 1440 800 800
Texture Units 80 72 40 40
ROPs 32 32 16 16
Core Clock 850MHz 725MHz 850MHz 750MHz
Memory Clock 1.2GHz (4.8GHz data rate) GDDR5 1GHz (4GHz data rate) GDDR5 975MHz (3900MHz data rate) GDDR5 900MHz (3600MHz data rate) GDDR5
Memory Bus Width 256-bit 256-bit 256-bit 256-bit
Frame Buffer 1GB 1GB 1GB 1GB
Transistor Count 2.15B 2.15B 959M 956M
Manufacturing Process TSMC 40nm TSMC 40nm TSMC 55nm TSMC 55nm
Price Point $379 $259 ~$180 ~$160

So what’s Cypress in a nutshell? It’s a RV790 (Radeon HD 4890) with virtually everything doubled, given the additional hardware needed to meet the DirectX 11 specifications, with new features such as Eyefinity  and angle independent anisotropic filtering packed in, lower idle power usage, and fabricated on TSMC’s 40nm process. Beyond that Cypress is a direct evolution/refinement of the RV7xx, and closely resembles its ancestor in design and internal workings.

The leader of the Evergreen family is the Radeon HD 5870, which will be AMD’s new powerhouse card. The 5870 features 1600 stream processors divided among 20 SIMDs, 80 texture units, and 32 ROPs, with 1GB of GDDR5 on-board connected to a 256bit memory bus. The 5870 is clocked at 850MHz for the core clock, and 1.2GHz (4.8GHz effective) for the memory, giving it a maximum compute performance of 2.72 teraflops. Load power is 188W, and idle power is a tiny 27W. It is launching at a MSRP of $379.

Below that we have the 5850 (which we will not be reviewing today), which is a slightly cut-down version of the 5870. Here we have 1440 stream processors divided among 18 SIMDs, 72 texture units, and the same 32 ROPs, with the same 256bit memory bus. The 5850 is clocked at 725Mhz for the core, and 1Ghz for the memory, giving it a maximum compute performance of 2.09 TFLOPS. With the disabled units, load power is slightly reduced to 170W, and it has the same 27W idle power. AMD expects the 5850 to perform at approximately 80% the performance level of the 5870, and is pricing it at $259.

Availability is going to be an issue, so we may as well get the subject out of the way. While today is a hard launch, it’s not quite as hard of a launch as we would like to see. AMD is launching the 5800 series with Dell, so it shouldn't come as a surprise if Dell has cards when e-tailers don't.

The situation with general availability is murky at best. The first thing we heard was that there may be a week of lag, but as of today AMD is telling us that they expect e-tailers to have 5870 cards on the 23rd, and 5850 cards next week. In any case whatever cards do make it in the channel are going to be in short supply, which matches the overall vibe we’re getting from AMD that supplies are going to be tight initially compared to the demand. So even after the first few days it may be hard to get a card. Given a tight supply we’ll be surprised if prices stick to the MSRP, and we’re likely to see e-tailers charge a price premium in the first days. Depending on just how high the demand is, this may mean it’ll take a while for prices to fall down to their MSRPs and for AMD to completely clear the backlog of demand for these cards.

Update: As of 5am EDT, we have seen the availability of 5870s come and go. Newegg had some in stock, but they have since sold out. So indeed AMD did make the hard launch (which we're always glad to see), but it looks like our concerns about a limited supply are proving to be true.

Finally, we asked AMD about the current TSMC 40nm situation, and they have told us that they are happy with it. Our concern was that problems at TSMC (specifically: yield) would be a holdup in getting more cards out there, but this does not look to be the case. However given the low supply of the cards compared to where AMD expects the supply to be, TSMC’s total 40nm capacity may not be to AMD’s liking.

Meet the 5870
Comments Locked

327 Comments

View All Comments

  • Xajel - Wednesday, September 23, 2009 - link

    Ryan,

    I've send a detailed solution for this problem to you ( Aero disabled when running and video with UVD accerelation ), but the basic for all readers here is just install HydraVision & Avivo Video Convertor packages, and this should fix the problem...
  • Ryan Smith - Wednesday, September 23, 2009 - link

    Just so we're clear, Basic mode is only being triggered when HDCP is being used to protect the content. It is not being triggered by just using the UVD with regular/unprotected content.
  • biigfoot - Wednesday, September 23, 2009 - link

    Well, I've been looking forward to reading your review of this new card for a little while now, especially since the realistic sounding specs leaked out a week or so ago. My first honest impression is that it looks like it'll be a little bit longer till the drivers mature and the game developers figure out some creative ways to bring the processor up to its full potential, but in the mean time, it looks like I'd have to agree with everyone's conclusion that even 150+GB/s isn't enough memory bandwidth for the beast, I'm sure it was a calculated compromise while the design was still on the drawing board. Unfortunately, increasing the bus isn't as easy as stapling on a couple more memory controllers, they probably would've had to resort back to a wider ring bus and they've already been down that road. (R600 anyone) Already knowing how much more die area and power would've been required to execute such a design probably made the decision rather easy to stick with the tested 4 channel GDDR5 setup that worked so well for the RV770 and RV790. As for how much a 6 or 8 channel (384/512 bit) memory controller setup would've improved performance, we'll probably never know; as awesome as it would be, I don't foresee BoFox's idea of ATI pulling a fast one on nVidia and the rest of us by releasing a 512-bit derivative in short order, but crazier things have happened.
  • biigfoot - Wednesday, September 23, 2009 - link

    Oh, I also noticed, they must of known that the new memory controller topology wasn't going to cut it all the time judging from all the cache augmentations performed. But like i said, given time, I'm sure they'll optimize the drivers to take advantage of all the new functionality, I'm betting that 90% of the low level functions are still handled identically as they were in the last generations architecture and it will take a while till all the hardware optimizations like the cache upgrades are fully realized.
  • piroroadkill - Wednesday, September 23, 2009 - link

    The single most disappointing thing about this card is the noise and heat.

    Sapphire have been coming out with some great coolers recently, in their VAPOR-X line. Why doesn't ATI stop using the same dustbuster cooler in a new shiny cover, and create a much, much quieter cooler, so the rest of us don't have to wait for a million OEM variations until there's one with a good cooler (or fuck about and swap the cooler ourselves, but unless you have one that covers the GPU AND the RAM chips, forget it. Those pathetic little sticky pad RAM sinks suck total donkey balls.)
  • Kaleid - Wednesday, September 23, 2009 - link

    Already showing up...

    http://www.techpowerup.com/104447/Sapphire_HD_5870...">http://www.techpowerup.com/104447/Sapphire_HD_5870...

    It will be possible to cool the card quietly...
  • Dante80 - Wednesday, September 23, 2009 - link

    the answer you are looking for is simple. Another, more elaborate cooler would raise prices more, and vendors don't like that. Remember what happened to the more expensive stock cooler for the 4770? ...;)
  • Cookie Monster - Wednesday, September 23, 2009 - link

    When running dual/multi monitors with past generation cards, the cards would always run at full 3d clocks or else face instabilities, screen corruptions etc. So even if the cards are at idle, it would never ramp down to the 2d clocks to save power, rending impressive low idle power consumption numbers useless (especially on the GTX200 series cards).

    Now with RV870 has this problem been fixed?
  • Ryan Smith - Wednesday, September 23, 2009 - link

    That's a good question, and something we didn't test. Unfortunately we're at IDF right now, so it's not something we can test at this moment, either.
  • Cookie Monster - Wednesday, September 23, 2009 - link

    It would be awesome if you guys do get some free time to test it out. Would be really appreciated! :)

Log in

Don't have an account? Sign up now