One of the two leading manufacturers of tape cartridge storage, FujiFilm, claims that they have a technology roadmap through to 2030 which builds on the current magnetic tape paradigm to enable 400 TB per tape.

As reported by Chris Mellor of Blocks and Files, Fujifilm points to using Strontium Ferrite grains in order to enable an areal data density on tape of 224 Gbit-per-square-inch, which would enable 400 TB drives. IBM and Sony have already demonstrated 201 Gbit-per-square-inch technology in 2017, with a potential release of the technology for high volume production in 2026. Current drives are over an order of magnitude smaller, at 8 Gbit-per-square-inch, however the delay between research and mass production is quite significant.

Strontium Ferrite would replace Barium Ferrite in current LTO cartridges. Strontium sits on a row above Barium in the periodic table, indicating a much smaller atom. This enables for much smaller particles to be placed into tracks, and thankfully according to Fujifilm, Strontium Ferrite exhibits properties along the same lines as Barium Ferrite, but moreso, enabling higher performance while simultaneously increasing particle density.

In standard LTO nomenclature, we are currently on LTO-8 where the drives have 12 TB raw capacity. Recent generational increases in LTO tend to double the capacity, so we’re looking at LTO-13 for 384 TB drives. Mellor indicates that there seems to be an average 2.5 years between commercialization of successive LTO drive standards, which leads to the following table:

LTO Generation Progression
AnandTech Standard Retail Length Raw
Cap.
Speed
MB/s
Time
to fill
Material
LTO-1   2000 609 m 0.1 TB 20 1h23 MP
LTO-2   2003 609 m 0.2 TB 40 1h23 MP
LTO-3   2005 680 m 0.4 TB 80 1h23 MP
LTO-4   2007 820 m 0.8 TB 120 1h51 MP
LTO-5   2010 846 m 1.6 TB 140 3h10 MP
LTO-6   2012 846 m 2.5 TB 160 4h20 MP/BaFe
LTO-7 2010 2015 960 m 6.0 TB 300 5h33 BaFe
LTO-8 2010 2017 960 m 12.0 TB 360 9h16 BaFe
LTO-9 2014 2020   24.0 TB *708 *9h25 BaFe
LTO-10 2014 *2022   48 TB *1100 *12h07 Ba/Sr Fe
LTO-11 2017 *2025   96 TB *1800 *14h49 SrFe
LTO-12 2017 *2027   192 TB *2400 *22h13 SrFe
LTO-13 *2021 *2030   *384 TB     SrFe?
LTO-14 *2021     *768 TB      
*Unconfirmed/estimated

Current generation LTO-8 cartridges take at least 9h16 to fill, with predicted speeds on future drives increasing that even further. Current LTO specifications go up to LTO-12, and so 400 TB would thus come in the LTO-13 generation.

Fujifilm states that 400 TB is the limit of Strontium Ferrite, indicating that new materials would be needed to go beyond. That said, we are talking about only 224 Gbit-per-square-inch for storage, which compared to mechanical hard disks going beyhind 1000 Gbit-per-square-inch today, there would appear to be plenty of room at the top if the technologies could converge.

Prices for current LTO-8 tape are the lowest out of all storage media. Depending on volume, prices around 0.8-1 cent per gigabyte is fairly common. Currently only Sony and Fujifilm are licencees to create LTO-8 media, however other companies such as HPE and IBM resell models under their own brand.

Source: Blocks and Files

Related Reading

POST A COMMENT

32 Comments

View All Comments

  • shadowjk - Sunday, July 5, 2020 - link

    I imagine they're very much treated like write-once and (hopefully) read-never kind of storage.
    I wouldn't be surprised if there was a hdd or SSD to which the file was first prepared before copy to tape. And that's the stage at which I would add redundancy.
    Reply
  • s.yu - Wednesday, July 8, 2020 - link

    A RAID5 of LTO-10 definitely sounds far superior(in basically every metric except R/W and write cycles) to RAID 5 of HDDs with matching capacity(which would still constitute a small server in 2022) if used specifically for media archiving. Reply

Log in

Don't have an account? Sign up now